Post by andymacdonald30 on May 1, 2009 19:45:59 GMT
If the parts for these trailers are as hard to come by as they were for my Rapido Confort You will not find replacement parts unless you are very lucky I had to put a complete new axel on mine But I did make it my self 2X 750 kg braked suspension units 1 X 1.2 meter of 200 mm X 150 MM 10mm thick c-section steel 4 X 40 mm X 15 mm bolts I had to weld the suspension units to the C-section then drill new holes for the 4 bolts through the steel and the chassis A lot of work and at a cost of 200 pounds or so But oh so worth it for the correct ride height, new brakes, and smooth ride
Hope you find the correct parts
T4 VW Transporter 2.5 TDI Slightly heavily modified to 155 BHP and whole load of fun
VW because I am worth it !!
Ready for the Stage 3 remap with a hybrid turbo Pushing 200 BHP
Do you have photo's of the old ones, are they cart springs (ie leafs)? I wouldn't look for replacements as if you are having problems finding secondhand ones, it might be quicker to source a spring maker locally that will make new replacements using your old ones as a pattern.